HP 3200 manual Changing the detect dial tone setting, To change detect dial tone

Changing the detect dial tone setting

Normally the product waits for a dial tone before attempting to a dial a fax number. If you are using the product on the same line as your phone, turn on the detect dial tone setting. This will prevent the product from sending a fax while someone is on the phone. In Australia, this setting by default is set to Off.

To change detect dial tone

1Press ENTER/MENU.

2Use the < or > key to select FAX SETUP and then press ENTER/ MENU.

3Press > once to select FAX SEND SETUP and then press ENTER/ MENU.

4Use the < or > key to select DETECT DIAL TONE and then press

ENTER/MENU.

5Use the < or > key to select ON or OFF and then press ENTER/ MENU.

EN Advanced send fax features and settings 85