Changing the language on the display panel

Use this procedure to have the control panel display messages and reports in a language other than the default for your country.

To change the language on the display panel

1Press ENTER/MENU.

2Use the < and > keys to select Common Settings, and then press ENTER/MENU.

3Use the < and > keys to select Language, and the press ENTER/ MENU.

4Use the < and > keys to select the language you want.

5 Press ENTER/MENU to save your selection.

Restoring factory defaults

This procedure returns all settings to the factory defaults and clears the fax header name and phone number. (See “Changing the information in the fax header” on page 79 for information on how to add your information to the fax header.) This procedure does not clear fax numbers and names associated with one-touch keys and speed-dial codes or delete any pages stored in memory.

To restore factory defaults

1Press ENTER/MENU.

2Use the < or > key to select SERVICE, and then press ENTER/ MENU.

3Use the < or > key to select RESTORE DEFAULTS, press ENTER/ MENU, and then press ENTER/MENU again to confirm your selection.

EN

Changing general default settings 41

Page 43
Image 43
HP 3200 manual Changing the language on the display panel, Restoring factory defaults, To restore factory defaults