HP 3200 manual Setting when the T.30 protocol trace report prints

Setting when the T.30 protocol trace report prints

You can set the T.30 protocol trace report to print:

lNever (the default)

lIf an error occurs

lAt the end of every send and received fax

To set when the T.30 protocol trace reports prints

1Press ENTER/MENU.

2Use the < or > key to select SERVICE and press ENTER/MENU.

3Use the < or > key to select PRINT T.30 TRACE and press

ENTER/MENU.

4Use the < or > key to select the option for when you want the T.30 protocol trace report to print.

5Press ENTER/MENU to save the selection.

EN Managing logs and reports 51