Setting error correction

Normally, the product monitors the signals on the telephone line while it is sending or receiving a fax. If the product detects an error signal during the transmission and the Error Correction setting is on, the product can request that a portion of the fax be resent.

The factory default for this setting is On. Only change it to Off if you are having trouble sending or receiving a fax and want to accept the errors in the transmission. Turning the setting off might be useful when you are trying to send or receive a fax overseas or using a satellite telephone connection.

To set error correction

1Press ENTER/MENU.

2Use the < or > key to select FAX SETUP and then press ENTER/ MENU.

3Use the < or > key to select ALL FAXES and then press ENTER/ MENU.

4Use the < or > key to select ERROR CORRECTION and then press

ENTER/MENU.

5Use the < or > key to select ON or OFF and then press ENTER/ MENU to save your selection.

EN

Advanced receive fax features and settings 97

Page 99
Image 99
HP 3200 manual Setting error correction, To set error correction