HP 3200 manual Canceled Fax, Conntect To, Number Not, Program-Med

Message	Cause	Solution
RECEIVING FAX	The fax line to which you were sending a	Call the recipient to ensure that fax
BUSY	fax was busy. The product has cancelled	machine is on and ready.
	sending the fax.	Check that you are dialing the correct
CANCELED FAX
		fax number.
		Check that the redial on busy option is
		enabled.
		Press and hold STOP/CLEAR for seven
		seconds to check for a dial tone.
		Unplug the product telephone cord from
		the wall, plug in a telephone, and try
		making a call.
		Plug the product phone cord into a jack
		for another phone line.
		See “Resolving fax problems” on
		page 149.
RECEIVING FAX	The fax line to which you were sending a	Allow the product to retry sending the
BUSY	fax was busy. The product automatically	fax.
	redials the busy number. (See “Changing	Call the recipient to ensure that fax
REDIAL
	how the product redials” on page 83.)	machine is on and ready.
PENDING		Check that you are dialing the correct
		fax number.
		Unplug the product telephone cord from
		the wall, plug in a telephone, and try
		making a call.
		Plug the product phone cord into a jack
		for another phone line.
		See “Resolving fax problems” on
		page 149.
SCANNER	The product is being used to create a	Wait until the PC scan has finished,
RESERVED	scan by a PC.	cancel the scan from the PC software,
		or press STOP/CLEAR.
FOR PC SCAN
SCANNING	The product cannot transmit scanned	Check the PC connection cable, and try
ERROR.	information to a PC.	the scan again.
CANNOT
CONNTECT TO
PC
SPEED DIAL	The one-touch key or speed-dial code has	Choose a speed-dial code to which you
(NUMBER) NOT	not been programmed, and therefore	have already assigned a fax number. To
	cannot be added to a group.	check which speed-dial codes have
PROGRAM-MED
		been programmed, see “Printing a one-
		touch, speed-dial, and group-dial report”
		on page 47.

EN Resolving control panel error messages 201