Smeg GCS90XG manual Arrangement of burners on hob, Lubrication of gas taps, Burners, Auxiliary

Models: GCS90XG

1 17

Page 13

Instructions for the installer

1	Auxiliary
2	Semi-rapid

3Rapid

4Double crow

After a while, the gas tap may become hard to turn or lock. If this happens, it has to be cleaned inside and re-greased.

Image 13

Contents

Contents 1. INSTRUCTIONS FOR SAFE AND PROPER USE IntroductionNEVER UNPLUG BY PULLING ON THE CABLE NEVER ATTEMPT TO REPAIR THE APPLIANCETHE PLATE ON THE CASING MUST NOT BE REMOVED Introduction2. POSITIONING OF HOB Instructions for the installer2.1.1 Attachment to support structure Instructions for the installer Instructions for the installer 3. ELECTRICAL CONNECTIONInstructions for the installer 4. GAS CONNECTION4.2 Ventilation of rooms 4.1 Connection to LPG4.3 Discharge of combustion products Instructions for the installer5.1 Removing the hob 5. ADAPTATION TO DIFFERENT TYPES OF GASInstructions for the installer Instructions for the installer 5.2 Regulation for LPGRated Burner5.4Regulation of primary air 5.3 Regulation for natural gasInstructions for the installer 6.1Regulation of minimum for natural gas 6. FINAL OPERATIONS6.2 Regulation of minimum for LPG Instructions for the installer6.4 Lubrication of gas taps 6.3 Arrangement of burners on hobInstructions for the installer BURNERSInstructions for the user 7. USING THE HOB7.1 Ignition of the burners 7.4 Using a griddle plate 7.2 Practical advice for using the burners7.3 Diameter of containers Instructions for the user8.1 Cleaning 8. LEANING AND MAINTENANCENever use a steam jet to clean the appliance 8.1.1 Regular daily cleaning of the hob8.2.1 Ignition plugs and safety devices 8.2 Cleaning of cooking hob componentsInstructions for the user 8.2.2 The electric element