Contents

6GB10055.fm Page 1 Monday, August 2, 2004 12:33 PM

BEFORE USING THE WASHING MACHINE FIRST WASH CYCLE

PRECAUTIONS AND GENERAL

RECOMMENDATIONS

DESCRIPTION OF THE WASHING MACHINE PREPARATION OF THE WASHING DETERGENTS AND ADDITIVES PROGRAMME SELECTION

CLEANING THE FOREIGN BODY TRAP DRAINING RESIDUAL WATER

CARE AND MAINTENANCE

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

TRANSPORT AND HANDLING

INSTALLATION

ELECTRICAL CONNECTION

Image 1

Contents

Contents Install the washing machine Before Using the Washing MachineRemove the packaging and check Electrical connection Remove the transport bracket First Wash Cycle Precautions and General Recommendations Preparation of the Washing Description of the Washing MachineSort the laundry Dyeing and bleaching Stain removalStarching Open the machine lid Loading the laundry Dosage Detergents and AdditivesFilling up with detergents and additives Choice of the right detergents and additives Programme Selection Cleaning the Foreign Body Trap Detergent dispenser Draining Residual Water Water inlet hose filter Check and clean regularly at least two or three times a year Washing machine does not start, no lamp lights up Water inlet hosesWashing machine does not start, but the pilot lamp is on Washing machine stops during the programme Water Stop fault may have been triggered by Water stop fault depending on model Specify Before contacting After-Sales Service Removal of transport bracket Connect the water inlet hose Adjust the feet Connect the water drain hose Water stop anti-flooding system Valid Only For Great Britain And Ireland Fuse replacementPolarized Plugs e.g pin, 13 amp plug conforming to BS 1363A GB K 400 TL Min Programme Temperature Load Water EnergyTerminate the Rinse Hold option No spin button

Smeg K400TL manual Contents