6GB10055.fm Page 18 Monday, August 2, 2004 12:33 PM
ELECTRICAL CONNECTION
Do not use extension leads or multi sockets. Electrical connections must be made in accordance with local regulations.
1) Warning - this appliance must be earthed
This appliance is normally supplied with a mains lead having a plug fitted in the factory which has been checked for correct earth continuity.
If the fitted plug is not suitable for your socket outlet, or if the machine’s mains lead is not fitted with a plug, you should fit a suitable new, good quality plug by following the instructions in (2) below.
Any unsuitable plug should be cut off and disposed of in order to avoid a possible shock hazard should it be inserted into a socket.
2)CONNECTION TO A REWIRABLE PLUG - to be carried out only by a qualified electrician
The wires in the mains lead are coloured in accordance with the following code:
BLUE - “NEUTRAL” (“N”) BROWN - “LIVE” (“L”)
GREEN AND YELLOW - “EARTH” (“E”)
Valid Only For Great Britain And Ireland
To fit a new plug, proceed as follows:
2.1Polarized Plugs (e.g. 3 pin, 13 amp plug conforming to BS 1363A)
a.The GREEN AND YELLOW wire must be connected to the terminal in the plug which is marked with the
letter “E” or by the Earth symbol |
| or coloured |
green and yellow. |
|
|
|
|
b.The BLUE wire must be connected to the terminal which is marked with the letter “N” or coloured blue.
c.The BROWN wire must be connected to the terminal which is marked with the letter “L” or coloured brown.
2.2
Fuse replacement
If the mains lead of this appliance is fitted with a
BS 1363A 13amp fused plug, replace the fuse only with an A.S.T.A. approved type conforming to BS 1362 and proceed as follows:
1.Remove the fuse cover (A) and fuse (B).
2.Fit the replacement 13 A fuse into the fuse cover.
3.Refit both into plug.
GB 18
