MAINTENANCE
Grease filters
CLEANING METAL SELF-SUPPORTING GREASE FILTERS
• The filters must be cleaned every two months of operation, or more frequently with heavy usage.
•Remove the filters one at a time, after disconnecting the relative fastening elements.
•Wash the filters, taking care not to bend them. Allow them to dry before refitting.
•When refitting the filters, make sure that the handle is visible on the outside.
| Odour filters (Recirculation version) |
|
| REPLACING ACTIVATED CHARCOAL FILTERS |
|
• | These filters are not washable and cannot be |
|
| regenerated, and must be replaced |
|
| approximately every four months of operation, |
|
| or more frequently with heavy usage. |
|
• | Dismantle the ducting support pulling the two |
|
| pommels A simultaneously. |
|
• | Remove the saturated activated carbon filters |
|
| by releasing the fixing hooks. |
|
• | Fit the new filters by hooking them into their | A |
| seating. |
|
•Close the ducting support by pushing and connecting the two pommels A.
| Lighting |
|
| LIGHT REPLACEMENT |
|
• | 20 W halogen light. |
|
• | Dismantle the ducting support pulling the two |
|
| pommels A simultaneously. |
|
• | Extract the Lamp from the Support. |
|
• Replace with another of the same type, making |
| |
| sure that the two pins are properly inserted in | A |
| the lamp holder socket holes. | |
|
| |
•Close the ducting support by pushing and connecting the two pommels A.
GB |
| 15 |
