Smeg KSET96, KSET66 Connections, Closing Element, Ducted Version Air Exhaust System, ø150

CLOSING ELEMENT

•The space between the edge of the hood and the rear wall can be closed by applying the element 20 provided, using the screws supplied for this purpose.

20

Connections

DUCTED VERSION AIR EXHAUST SYSTEM

When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø 150 mm, the choice of which is left to the installer.

•	Fix the pipe in position using sufficient pipe
•	clamps (not supplied).	ø150
	Remove any activated charcoal filters.

	RECIRCULATION VERSION AIR OUTLET
•	Cut a hole ø 150 mm in the wall unit over the	12550
	hood.
• Connect the hood body outlet to the top part of
	the wall unit using a rigid or flexible pipe ø 150
	mm, to be selected by the installer.
•	Fix the pipe in position using sufficient pipe
	clamps (not supplied).
•	Ensure that the activated charcoal filters have
	been inserted.

ELECTRICAL CONNECTION

•Connect the hood to the mains through a two-pole switch having a contact gap of at least 3 mm.

•When opening the sliding carriage for the first time after installing the hood, pull it out briskly until it clicks.

GB 13