| Mounting the hood body | Vr |
• | Before attaching the hood body, tighten the two screws Vr lo- |
|
| cated on the hood body mounting points. |
|
• | Hook the hood body onto the screws 12a. |
|
• Fully tighten support screws 12a. |
| |
• Adjust screws Vr to level the hood body. | 12a | |
Note: The Hood body should be secured to wall studs. If neces- sary, install a wood support behind the dry wall, flush mounted between 2 studs. This will provide the necessary structure and support for mounting.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using a rigid 6” duct.
• | Install the damper 10 ø 6”. | 10 |
• | Fix the duct in position using sufficient pipe clamps (not sup- |
|
plied).
DUCTLESS VERSION AIR OUTLET | 15 | 14.1 |
• Push fit connection 15 onto the hood body outlet.
• Insert the connection extension pieces laterally 14.1 in connec- tion 15.
• Make sure that the outlet of the extension pieces 14.1 is hori- zontally and vertically aligned with the chimney outlets. If this is not the case, adjust the position by either reversing the con- nection extension pieces 14.1 and then reassemble as described previously.
• Ensure that the activated charcoal filters have been inserted.
EN |
| 9 |
| 9 |
