GB

7.6 CLEANING THE WATER INLET FILTER

The machine is fitted with a filter for protecting the water inlet valves.

The filter is fitted the gas thread of the inlet hose connected to the tap

Clean the filter if no water or insufficient quantities of water enter the washer dryer. To do this, proceed as follows:

Remove the plug from the socket to disconnect the machine from the electrical power supply.

Turn off the water tap.

Unscrew the inlet hose from the tap.

Remove the filter from the inlet hose gas thread.

Clean the filter with water and a brush.

When screwing the inlet hose back on to the tap, make sure the filter is correctly positioned.

23

Page 23
Image 23
Smeg LBS1600X manual Cleaning the Water Inlet Filter