User instructions, Technical Data, Width, Capacity | Smeg LVS1449B

TECHNICAL DATA

User instructions

TECHNICAL DATA

Width		597 ⎟ 599 mm

Depth measured flush with the		Free standing: 600 mm
outer edge of the control panel		Semi-integrated: 570 mm

Height (depending on models)		Free standing: from 850 mm to 870 mm
		from 890 mm to 910 mm
		Semi-integrated: from 820 mm to 870 mm
		from 860 mm to 910 mm

Capacity		14 Standard place settings

Water supply pressure		min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

Electrical characteristics		See rating plate

36

Image 37

Smeg LVS1449B User instructions, Technical Data, Width, Capacity, Water supply pressure, Electrical characteristics

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructions THIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS 2. Installation and hook-up Installation instructionsFor free-standing models only 2.1 Water supply connection CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD 2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Fuse replacement 3. Description of the controls User instructions6 START/STOP BUTTON 7 POWER ON LIGHT 3.1 Front panel Only run the soak program with half loads Before starting a washing program make sure that 3.3 Washing programsThe correct amount of detergent has been added to the dispenser LIGHTING START PROGRAM SELECTION PROGRAMEND PROGRAM INTERRUPTING A PROGRAM STOPPING A PROGRAM TO CHANGE A PROGRAM Particularly, on the display it will have the following indications HALF LOAD WASH FUNCTION on some models only TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES 4.1 Using the water softening system 4. Operating instructions User instructions WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOWER BASKET 4.4 Using the baskets Loading examples ½ LOAD LOADING THE LOWER BASKET CUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKET Version B ADJUSTING THE UPPER BASKET User instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS 5.1 General warnings and recommendations GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tap If the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap again If the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6 E7 E8 E9 Electrical characteristics TECHNICAL DATAWidth Capacity des ressortslateraux avant l’installation mollelaterali primadell’installazioneMontare la porta e regolarelatensione delle einstellen