User instructions | Smeg LVS1449B instruction

HALF LOAD WASH FUNCTION (on some models only)

User instructions

HALF LOAD WASH FUNCTION (on some models only)

This function is recommended for loads of up to 7 place-settings, and cuts down on the use of water and electricity.

By pressing the ½ LOAD WASH (3) button it is possible to select only one basket washing (upper or lower).

After having the program selected, continue as follows:

•by pressing for one time the ½ LOAD WASH (3) button, it will select the upper basket and on the display will compare the following visualization;

•by pressing the ½ LOAD WASH (3) button again the lower basket is selected;

•by pressing a third time the ½ LOAD WASH (3) button it will bring back to the full load washing mode.

N.B.: by selecting the ½ LOAD mode, a modification in the indication of the program duration will set.

One half of the cutlery basket can be placed in the ½ LOAD program basket.

WARNING: do not load dishes and cutlery into the non-selected basket, because the water spray will only reach the selected basket.

15

Image 16

Smeg LVS1449B instruction manual User instructions, HALF LOAD WASH FUNCTION on some models only

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents Safety instructions 1. Safety and operating instructions THIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS 2. Installation and hook-up Installation instructionsFor free-standing models only 2.1 Water supply connection CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION 2.2 Electrical connection and precautions IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD Fuse replacement FOR GREAT BRITAIN ONLY User instructions 3. Description of the controls6 START/STOP BUTTON 7 POWER ON LIGHT 3.1 Front panel Only run the soak program with half loads 3.3 Washing programs Before starting a washing program make sure thatThe correct amount of detergent has been added to the dispenser LIGHTING SELECTION PROGRAM START PROGRAMEND PROGRAM INTERRUPTING A PROGRAM TO CHANGE A PROGRAM STOPPING A PROGRAM Particularly, on the display it will have the following indications HALF LOAD WASH FUNCTION on some models only TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES 4. Operating instructions 4.1 Using the water softening system User instructions 4.2 Using the rinse aid and detergent dispensers WATER HARDNESS TABLE ADJUSTING THE RINSE AID DISPENSER SETTING ADDING THE RINSE AID ADDING THE DETERGENT During the washing cycle, the dispenser will be opened automatically User instructions Correct loading of the dishes helps ensure optimal washing results 4.3 General warnings and recommendationsMAKE SURE that the items being washed are dishwasher-safe Items which are not dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain 4.4 Using the baskets LOWER BASKET LOADING THE LOWER BASKET Loading examples ½ LOAD CUTLERY BASKET UPPER BASKET LOADING THE UPPER BASKET ADJUSTING THE UPPER BASKET Version B User instructions 5. Cleaning and maintenance CLEANING THE WATER INTAKE FILTERCLEANING THE SPRAY ARMS 5.1 General warnings and recommendations CLEANING THE FILTER UNIT GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCEPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tap TROUBLESHOOTING MINOR PROBLEMS If the dishes are not being cleaned properly, check thatBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap again If the dishes show signs of streaking, staining, etc., check that If the dishes fail to dry or remain dull, check thatIf there are visible traces of rust inside the tank 6. Troubleshooting TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEMFAULT E1 E2 E3 E4 E5 E6 E7 E8 E9 TECHNICAL DATA Electrical characteristicsWidth Capacity mollelaterali primadell’installazione des ressortslateraux avant l’installationMontare la porta e regolarelatensione delle einstellen