Installation instructions, For Great Britain Only | Smeg LVS1449B

FOR GREAT BRITAIN ONLY:

Installation instructions

FOR GREAT BRITAIN ONLY:

THIS APPLIANCE MUST BE EARTHED.

Fuse replacement

If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.S.T.A. approved fuse to BS 1362 type and proceed as follows:

1.Remove the fuse cover A and fuse B.

2.Fit replacement 13A fuse into fuse cover.

3.Refit both into plug.

The fuse cover must be refitted when changing a fuse and if the fuse cover is lost the plug must not be used until a correct replacement is fitted.

Correct replacement are identified by the colour insert or the colour embossed in words on the base of the plug.

Replacement fuse covers are available from your local electrical store.

8

Image 9

Smeg LVS1449B instruction manual Installation instructions, For Great Britain Only, Fuse replacement

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructions THIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS Installation instructions 2. Installation and hook-upFor free-standing models only CONNECTING TO THE WATER SUPPLY 2.1 Water supply connectionDRAIN CONNECTION IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD 2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Fuse replacement 3. Description of the controls User instructions6 START/STOP BUTTON 7 POWER ON LIGHT 3.1 Front panel Only run the soak program with half loads Before starting a washing program make sure that 3.3 Washing programsThe correct amount of detergent has been added to the dispenser LIGHTING START PROGRAM SELECTION PROGRAMEND PROGRAM INTERRUPTING A PROGRAM STOPPING A PROGRAM TO CHANGE A PROGRAM Particularly, on the display it will have the following indications HALF LOAD WASH FUNCTION on some models only TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT TO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENTREMOVING THE DISHES 4.1 Using the water softening system 4. Operating instructions User instructions WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions 4.3 General warnings and recommendations Correct loading of the dishes helps ensure optimal washing resultsMAKE SURE that the items being washed are dishwasher-safe Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOWER BASKET 4.4 Using the baskets Loading examples ½ LOAD LOADING THE LOWER BASKET CUTLERY BASKET LOADING THE UPPER BASKET UPPER BASKET Version B ADJUSTING THE UPPER BASKET User instructions CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenanceCLEANING THE SPRAY ARMS 5.1 General warnings and recommendations GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE CLEANING THE FILTER UNITPROLONGED DISUSE Fill the rinse aid dispenser Shut off the water supply tap If the dishes are not being cleaned properly, check that TROUBLESHOOTING MINOR PROBLEMSBEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE Reconnect the water intake hose and open the tap again If the dishes fail to dry or remain dull, check that If the dishes show signs of streaking, staining, etc., check thatIf there are visible traces of rust inside the tank TABLE OF FAULTS DETECTED BY THE SELF-DIAGNOSTICS SYSTEM 6. TroubleshootingFAULT E1 E2 E3 E4 E5 E6 E7 E8 E9 Electrical characteristics TECHNICAL DATAWidth Capacity des ressortslateraux avant l’installation mollelaterali primadell’installazioneMontare la porta e regolarelatensione delle einstellen