Installation
3.4 |
| If you are installing a Vision 90t/100t with the optional CineWide or CineWide with | |
Installing the Optional |
| AutoScope system, install the secondary anamorphic lens in accordance with the | |
CineWide Lens |
| instructions provided with the lens installation kit. | |
|
|
| |
|
|
| |
3.5 |
| There are several methods for mounting the projector. Depending on your chosen | |
Mounting the Vision |
| installation, one method may be more suitable than another. | |
90t/100t |
|
|
|
Floor Mounting (Upright) | ➤ | In typical front and rear screen installations, the projector can be mounted to a secure and | |
|
| level surface such as a table or cart. Carts are useful when moving a projector during a | |
|
| presentation or from site to site. If possible, lock the wheels when it’s in position to prevent it | |
|
| from being moved during a presentation. | |
Ceiling Mounting (Inverted) | ➤ | For fixed installations, and for those that want the projector out of sight or have a limited | |
|
| space for projector and audience, you can invert the Vision 90t/100t and suspend it from the | |
|
| ceiling using a | |
|
| Note | Use only the |
|
| projector. Install the mount kit according to the instructions provided | |
|
|
| |
|
|
| with it. |
|
| The projector can also be inverted and placed in an enclosure above and behind the viewing | |
|
| area. Install four feet on the inside bottom surface of the enclosure on which the projector | |
|
| can rest. A variety of materials can be used for this purpose (for example, rubber crutch tips | |
|
| or turntable feet). |
|
Adjusting the Projection | ➤ | If the Vision 90t/100t is | |
Angle |
| projector, you can tilt the projector at a slight angle by adjusting the ceiling mount. | |
If you do this, you may need to shift the image using the
20 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
