Vidikron Vision 100t, Vision 90t Command Parameter Value Description Min/max Stored?, Preset?

Serial Communications

Table 6-1. Serial Commands (continued)

Command	Parameter		Value	Description
	(min/max)		Stored?
		Picture Adjust Commands
BRIGHTNESS	-100/100		YES	Sets a value for brightness
BRIGHTNESS?	NA		NA	Returns brightness setting value
CHROMADELAY	-12/12		YES	Sets a value for input color chroma delay
CHROMADELAY?	NA		NA	Returns input color chroma delay setting
COLOR	-100/100		YES	Sets a value for color
COLOR?	NA		NA	Returns color setting value
CONTRAST	-100/100		YES	Sets a value for contrast
CONTRAST?	NA		NA	Returns contrast setting value
FILMMODE	0/1		YES	Sets Film Mode off (0) or on (1)
FILMMODE?	NA		NA	Returns Film Mode setting (0 = off; 1 = on)
FILTER	0/15		YES	Sets a value for input color noise filter
FILTER?	NA		NA	Returns input color noise filter setting
PHASE	0/3		YES	Adjusts phase
PHASE?	NA		NA	Returns phase setting value
SHARPNESS	-6/6		YES	Sets a value for sharpness
SHARPNESS?	NA		NA	Returns sharpness setting value
TINT	-100/100		YES	Sets a value for tint
TINT?	NA		NA	Returns tint setting value
		Image Preset Commands
CUSTOM1	NA		YES	Loads “Custom 1” image preset
CUSTOM2	NA		YES	Loads “Custom 2” image preset
DAY	NA		YES	Loads “ISF Day” image preset
NIGHT	NA		YES	Loads “ISF Night” image preset
PRESET?	NA		NA	Returns currently-selected preset
				(ISF Day, ISF Night, Custom 1 or Custom 2)

Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual 51