Operation
Service ➤
Service
Test Video
Input Names
Remote Control
Display Device
HD Format
Triggers
Miscellaneous
Resolution
System Reset
Restore Saved Settings
Use the Service menu to access advanced projector configuration settings. This menu
should be used by ISF-certified technicians only.
You must enter a passcode to access the Service menu.
Note
Test Video: Select Test Video from the Service Menu to access the internal test patterns on the Vision 90t/100t. Four patterns are available, consisting of white/gray or colored bars. These are useful for calibrating other theater source components (DVD player, HD tuner etc.) that have their own picture controls.
Press MENU to exit test pattern mode.
Input Names
| Restore |
Composite | Composite |
|
|
| |
Component SD | Component SD |
HD/RGB 1 | HD/RGB 1 |
HD/RGB 2 | HD/RGB 2 |
DVI 1 | DVI 1 |
DVI 2 | DVI 2 |
Save |
|
Input Names: You can give each Vision 90t/100t input a descriptive name. For example, you may want to change the default input name to the type of source component connected to it: “VCR,” “DVD,” “Laptop” et cetera. Composite,
To edit an input name, select Input Names from the Service menu. Press 
or 
to select an input and press ENTER. Use the 
or 
buttons to change a character; press 
or 
to select a character to change. When you have finished editing the input name, press MENU.
To restore the default input name, press 
repeatedly to highlight that input name in the “Restore” column. Then, press ENTER.
To save input names so that they can be restored after a System Reset (described on page 43), press 
repeatedly to highlight “Save.” Then, press ENTER.
The 
button takes you from top to bottom in the left column, then from
Note top to bottom in the right column. To highlight “Save,” scroll through both columns.
40 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual
