Vidikron Vision 100t center are aligned with each other, up/down vertical offset percentages

Models: Vision 90t Vision 100t

1 76
Download 76 pages 43.91 Kb
Page 29
Image 29
center are aligned with each other.

Installation

Vertical Lens Shift: The Vision 90t/100t zoom lenses (options 1, 2, 3, 4 and 6 in Table 3-3)provide up to 80% of downward vertical lens shift. For example, with a 96 x 54-inch (16:9) screen, you can shift the image up to 43.20 inches (1.10 meters) below the screen center.

(Upward vertical lens shift is not possible. Vertical lens shift is not possible in either direction with lens option 5.)

Horizontal Lens Shift: The Vision 90t/100t zoom lenses (options 1, 2, 3, 4 and 6 in Table 3-3)allow up to 10% of horizontal lens shift in either direction (left or right). For example, with a 96 x 54-inch (16:9) screen, you can shift the image up to 9.60 inches (24.38 cm) left or right of the screen center. (Horizontal lens shift is not possible with lens option 5.)

1. With no vertical or horizontal lens shift, the lens center and screen

Note

center are aligned with each other.

 

 

2. Vertical shift limits are percentages of the screen height. Horizontal

 

shift limits are percentages of the screen width.

 

3. Vertical lens shift figures apply to ceiling mount configurations.

 

For floor installations (where the projector is upright), reverse the

 

up/down vertical offset percentages.

In rear screen applications where space behind the projector is limited, a mirror may be used

Folded Optics

to fold the optical path, as shown in Figure 3-5.The position of the projector and mirror must

 

be accurately set. If you are considering this type of installation, contact your dealer for

 

assistance.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 3-5. Folded Optics

Other considerations and tips that can help improve your installation:

Other Considerations

Keep the ambient temperature constant and below 35°C (95°F). Keep the projector away from heating and/or air conditioning vents. Changes in temperature may cause drifts in the projector circuitry, which may affect performance.

Keep the projector away from devices that radiate electromagnetic energy such as motors and transformers. Common sources of these include slide projectors, speakers, power amplifiers and elevators.

Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual

19

Page 29
Image 29
Vidikron Vision 100t, Vision 90t manual center are aligned with each other, shift limits are percentages of the screen width