Maintenance and Troubleshooting
Note that the lens mount flange has a female socket connector for the lens motor on the right side of the flange.
Note that the lens assembly motor has a male socket connector.
6.Hold the replacement lens assembly with the motor facing right (or left, if the projector is inverted). Carefully insert the back of the lens assembly into the hole in the lens flange.
7.Gently push the lens assembly in until it is seated flush against the flange and the connectors have seated.
8.Secure the lens assembly to the projector flange with the three Allen screws that you loosened in Step 4.
9.Replace the front lens bezel and tighten the Phillips screws at the top and bottom of the bezel to secure it.
Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual | 47 |
