Vidikron Vision 90t, Vision 100t manual Lens Adjustments, Using the On-Screen, Menus, Focus, Zoom

Operation

4.3	To access the motorized lens controls, select Display Device from the Service Menu, then
Lens Adjustments	select Lens from the Display Device menu. The Lens menu gives you a great deal of control
	over the picture size, position and focus:
Focus ➤	To focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, press
	and hold the ENTER button.
Zoom ➤	To make the picture smaller (zoom out), use the cursor buttons to highlight the minus sign
	(-). Then, press and hold the ENTER button.
	To enlarge the picture (zoom in), use the cursor buttons to highlight the plus sign (+). Then,
	press and hold the ENTER button.
Shift ➤	To change the projected image position, use the cursor buttons to highlight “Left,” “Right,”
	“Up” or “Down.” Then, press and hold the ENTER button to shift the image in that direction.
4.4	Press the MENU button on either the remote control or the rear panel to display the Main
Using the On-Screen	Menu. To select a menu item, use the and buttons on either the remote control or the
Menus	rear panel to highlight it. Press ENTER to confirm your selection.
	The Vision 90t/100t OSD menus are arranged hierarchically, as shown in Figure 4-1.
	Depending on the selected input source and signal characteristics, some menu options may
	not be available.

28 Vidikron Vision Model 90t and Model 100t Owner’s Operating Manual