Instructions for the installer
7. ADAPTATION TO DIFFERENT TYPES OF GAS
The appliance is preset for natural gas G20 (2H) at a pressure of 20 mbar. In the case of operation with other types of gas the burner nozzles must be changed and the minimum flame adjusted on the gas taps. To change the nozzles, proceed as described below.
7.1 Replacing nozzles
1Extract the grid and remove all the caps and
2Unscrew the burner nozzles with a 7 mm socket wrench;
3Replace the burner nozzles according to the type of gas to be used (see point “8.1 Burner, nozzle and gas consumption characteristics”).
4Replace the burners in the correct position.
41
