User instructions
In case that the door is opened during the operation, to the next door closing it is going to be necessary to start the program as shown in paragraph “STARTING THE PROGRAM”. The program will resume from the point in which it was interrupted.
In case that the tub temperature is higher than 50°C the program will start about 30 seconds later.
HALF LOAD WASH SETTING (certain models only) (available in all programs except the soak program)
This function is ideal for small loads and saves water and electricity. It is controlled by the HALF LOAD button (5) and allows washing in the upper basket only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of water will only reach the upper basket.
DELAYING THE PROGRAM
(presente solamente su alcuni modelli)
(disponibile in tutti i programmi escluso l'ammollo)
The PROGRAM DELAY button (7) can be pressed to delay the start of the washing program by 3,6 or 9 hours. This function allows you to set the dishwasher to work at your preferred time of day.
After selecting the delay, start the program (see relative section).
The appliance will prewash the dishes, after which the “program delay” set previously will come into effect (light 8 indicating the time left before the start of the program and light 4 indicating the program set flash).
13
