User instructions, Technical Data, Width | Smeg PL115X, PL115NE

TECHNICAL DATA

User instructions

TECHNICAL DATA

Width

Depth measured flush with the outer edge of the control panel

Height (depending on models)

Capacity

Water supply pressure

Electrical characteristics

34

597 ⎟ 599 mm

Free standing: 600 mm

Semi-integrated: 570 mm

Free standing: from 850 mm to 870 mm from 890 mm to 910 mm

Semi-integrated: from 820 mm to 870 mm from 860 mm to 910 mm

12 Standard place settings

min. 0,05 - max. 0,9 MPa (min. 0.5 – max. 9 bar)

See rating plate

Image 35

Smeg PL115X, PL115NE User instructions, Technical Data, Width, Height depending on models Capacity Water supply pressure

Contents

GUIDE FOR USING THE DISHWASHER AND THE WASHING PROGRAMS Contents 1. Safety and operating instructions Safety instructions THIS DISHWASHER MUST BE USED BY ADULTS AQUASTOP MODELS For free-standing models only Installation instructions2. Installation and hook-up DRAIN CONNECTION CONNECTING TO THE WATER SUPPLY2.1 Water supply connection IF THE APPLIANCE IS PROVIDED WITH A PLUGLESS SUPPLY CORD 2.2 Electrical connection and precautions FOR GREAT BRITAIN ONLY Fuse replacement 1 ON/OFF BUTTON 2 START/PAUSE BUTTON 3 SELECTION PROGRAMS BUTTON User instructions3. Description of the controls 3.1 Front panel SETTING THE WASHING PROGRAM The correct amount of detergent has been added to the dispenser SWITCHING ON3.2 Washing programs Before starting a washing program make sure that ANNULLING A PROGRAM END OF PROGRAMINTERRUPTION A PROGRAM CHANGING A PROGRAM disponibile in tutti i programmi escluso lammollo DELAYING THE PROGRAM presente solamente su alcuni modelli REMOVING THE DISHES TO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENTTO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT 4.1 Using the water softening system 4. Operating instructions ADJUSTING THE WATER SOFTENING SYSTEM WATER HARDNESS TABLE 4.2 Using the rinse aid and detergent dispensers ADDING THE RINSE AID ADJUSTING THE RINSE AID DISPENSER SETTING During the washing cycle, the dispenser will be opened automatically ADDING THE DETERGENT User instructions MAKE SURE that the items being washed are dishwasher-safe 4.3 General warnings and recommendationsCorrect loading of the dishes helps ensure optimal washing results Dishes and objects in copper, tin, zinc or brass these tend to stain Items which are not dishwasher-safe LOADING THE LOWER BASKET 4.4 Using the basketsLOWER BASKET UPPER BASKET CUTLERY BASKET Loading examples Models with cutlery racks LOADING THE UPPER BASKET Version B ADJUSTING THE UPPER BASKET User instructions 5.1 General warnings and recommendations 5. Cleaning and maintenanceCLEANING THE WATER INTAKE FILTER CLEANING THE SPRAY ARMS Fill the rinse aid dispenser Shut off the water supply tap CLEANING THE FILTER UNITGENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE PROLONGED DISUSE Reconnect the water intake hose and open the tap again TROUBLESHOOTING MINOR PROBLEMSIf the dishes are not being cleaned properly, check that BEFORE STARTING THE DISHWASHER AFTER PROLONGED DISUSE If there are visible traces of rust inside the tank If the dishes fail to dry or remain dull, check thatIf the dishes show signs of streaking, staining, etc., check that E1 E2 E3 E4 E5 E6 6. Troubleshooting service the program and switch off the dishwasherSwitch the dishwasher back on, program it problem persists, contact the after-sales Height depending on models Capacity Water supply pressure TECHNICAL DATAElectrical characteristics Width einstellen mollelaterali primadell’installazionedes ressortslateraux avant l’installation Montare la porta e regolarelatensione delle