Instructions for the Installer
2.2 Fitting the adhesive foam rubber strip
Fit the adhesive foam rubber strip (supplied with the hob) around the outside edge of its surround.
It will act as a cushion between the surface of the surround and that of the cabinet. The diagram on the right shows the correct position for the foam rubber strip. Take great care when fitting it to ensure that it does not project beyond the outside edge of the frame.
2.3 Fitting the fixing clips
Fit the fixing clips in all the points marked with an arrow. The clips fix the hob an ensure that it is centred correctly.
To fit the clips to the hob, simply press them gently horizontally into the groove provided (fig. A).
Then turn them upwards to fix them permanently in place (fig. B).
24