Instructions for the user
7.0.4 Programming |
|
Cooking duration: the 2nd button | can be pressed to set the cooking |
duration. Before it can be set, the thermostat must be turned to the desired cooking temperature and the functions switch knob to any setting. To set the cooking duration, proceed as follows:
• | Press the |
|
| key for 1 / 2 seconds; the pointer will |
| |||||||||
| locate on 12 (Fig. 1). |
|
|
|
|
| ||||||||
• | Use the |
|
| and |
| key to set the cooking duration: |
| |||||||
|
|
|
| |||||||||||
| each pressure on the |
| key adds 1 minute to the | 1) | ||||||||||
|
| |||||||||||||
| cooking duration, and every 12 minutes a new | |||||||||||||
|
| |||||||||||||
| inside segment will light up (figure 2 shows a |
| ||||||||||||
| cooking duration of 1 hour). |
| ||||||||||||
• Once the desired duration is obtained, cooking will |
| |||||||||||||
| start about 6 seconds after the last pressure on |
|
|
| ||||||||||
|
|
| ||||||||||||
| or |
| . |
|
|
|
|
|
|
|
|
|
| 2) |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
•Once cooking has started the display will show the current time, represented by the constantly illuminated segments, and the minutes left to the end of the cooking time, represented by the flashing segments (each flashing segment means 12 minutes of cooking time left).
•At the end of the cooking time the timer will switch the oven heating elements off, the beeps will start to sound and the numbers on the dial will flash.
•The duration can also be reset by resetting the program selected:
pressing the central key 
for 1 or 2 seconds will delete the duration set and the oven will have to be manually switched off.
Warning: it is not possible to set cooking durations of more than 6 hours.
12
