Instructions for the user
7.0.2 Setting the time
When the oven is used for the first time, or after an interruption in the electricity supply, the display flashes at regular intervals.
Press 
for 1 / 2 seconds to stop the display flashing and start the procedure for setting the correct time. Press the value modification keys
or 
to increase or decrease the setting by one minute for each pressure.
Press one of the two value modification keys until the current time appears. 6/7 seconds after the last key is pressed, the clock will start from the time set.
At the end of each programmed operation 8 beeps will sound 3/4 times at intervals of about 1 and a half minutes. This sequence can be stopped at any time by pressing any key.
7.0.3 Minute-Minder
This function does not stop cooking; it simply activates the buzzer.
•Press 
and the display will light up as shown in figure 1.
•Within 6/7 seconds, press the 
or 
keys to set the timer. Each time a key is pressed, 1 outside
segment, representing 1 minute of cooking time, will light up or go out. (figure 2 shows a cooking time of 10 minutes).
•6/7 seconds after the last key is pressed, the countdown will start; when it finishes, the buzzer will sound.
•During the countdown, the current time can be
viewed by pressing the 
key once; press it again to return to the timer display.
•At the end of the countdown, the oven must be switched off manually by turning the thermostat and function selector knob to 0.
1)
2)
12
