Smeg SCA311XP manual Setting the cleaning cycle with electronic programmer, Function Selector Knob

Instructions for the User

ON	-
ON	300	°C
OFF	500	°C
OFF	300	°C

12.6.3 Setting the cleaning cycle with electronic programmer

FUNCTION SELECTOR KNOB

CLEANING CYCLE MINIMUM DURATION: 1 h and 30’

Turn the function selector knob to the symbol: the thermostat light will come on and the programmer

will automatically set on a minimum Pyrolysis duration of . To display or adjust this duration,

press the key and the increase/decrease keys or . The duration of the pyrolysis cycle can be set up to a maximum of 3 hours.

The cleaning cycle can be programmed to start at a preset time. Press the key and adjust the values using the value variation keys or .

12.6.4 How the automatic cleaning cycle works (for models with electronic analogue clock)

The table below shows an example of operation of the automatic cleaning cycle.

One minute after the start of the pyrolysis cycle, an interlock device which prevents opening of the door is tripped and number 12 on the timer starts to flash.

The door interlock is only released later, when the temperature inside the oven drops back below 300°C, and number 12 on the timer stops flashing.

23