Instructions for the User
13.EXTRAORDINARY MAINTENANCE
Occasionally, the oven will require minor servicing procedures or the replacement of parts subject to wear and tear, such as gaskets, light bulbs, etc. The specific operations for each procedure of this kind are provided below.
Before carrying out any operation involving access to live parts, disconnect the appliance from the electricity supply.
13.1 Changing the light bulb
Remove the protective cover A by unscrewing it anticlockwise and replace the bulb B with another of the same type. Replace the protective cover A.
Use only light bulbs approved for ovens (T 300°C).
13.2 Removing the door
13.2.1 With mobile levers
With the door completely open, lift the levers A until they touch the hinges B and take hold of the two sides of the door with both hands close to the hinges. Raise the door to an angle of about 45° and remove it. If the hinges have not locked, repeat the operation, raising the levers A and keeping the door slightly raised. To reassemble, fit the hinges B into their grooves, then 1) lower the door into place, ensuring that it remains fitted into the grooves C, then lower the levers A.
25
