Smeg SCB66MPX5 manual Description Of Front Panel Controls, Instructions for the User, Dual heating

Instructions for the User

7. DESCRIPTION OF FRONT PANEL CONTROLS

All the control and monitoring devices are clearly in view on the front panel. The table below provides the key to the symbols used.

OVEN THERMOSTAT	FRONT LEFT-HAND COOKING ZONE
FUNCTION SELECTOR KNOB	REAR LEFT-HAND COOKING ZONE
	REAR RIGHT-HAND COOKING ZONE
	FRONT RIGHT-HAND COOKING ZONE

Before using the oven, check that the display is showing the symbol (see point “11. ELECTRONIC PROGRAMMER”).

HOB CONTROL KNOBS

Standard heating

The ring beside each knob identifies the corresponding cooking zone. To switch it on, turn the knob to the required setting. Setting is on a gradual scale, so all the intermediate positions between the numbers can be used.

To switch off the zone, return the knob to the setting

Dual heating

The ring beside each knob identifies the corresponding cooking zone. To heat the inner cooking zone, turn the knob to the required setting. To heat both cooking zones (inner

and outer) simultaneously, turn the knob to / and then release it. The knob will return to the maximum setting. To regulate the heating level, turn the knob anti-clockwise to the setting required. To return to heating of the inner cooking zone, turn the knob to and then turn it to the required setting. To switch off the zone, return the knob to

THERMOSTAT KNOB

The cooking temperature is selected by turning the knob clockwise to the required setting, between 50° and 275°C.

The light comes on to indicate that the oven is heating up. This light goes out when the set temperature is reached. Flashes at regular intervals to indicate that the temperature inside the oven is being kept constantly at the set level.

48