Instructions for the Installer

14.2 Fitting the rear splash-back

Unscrew the nuts B.

Place the splash-back on the hob, aligning the rods C with the holes D.

Fix the splash-back to the hob by tightening the screws A.

14.3 Positioning and levelling the appliance (depending on model)

After making the electrical and gas connections, level the the appliance on the ground by means of its four adjustable feet. For good cooking results, the appliance must be properly levelled. Depending on the model you have purchased, the foot height adjustment range may vary from 70 to 95 mm and from 110 to 160 mm. These heights refer to the distance between the highest point of the foot (fixed part) and the lowest point (movable part which rests on the floor).

62

Page 20
Image 20
Smeg SCB66MPX5 manual Fitting the rear splash-back, Positioning and levelling the appliance depending on model