Instructions for the installer

In case of installation on a hollow compartment with doors, a separating panel has to be placed under the hob. Keep a minimum distance of 10 mm between the bottom of the unit and the panel surface. The panel has to be easily removable to allow access in the event of technical service.

Page 5

Image 5

Smeg SDR60XG3 manual Instructions for the installer

Contents

Adaptation to Different Types of GAS Index Instructions for Safe and Proper USE Introduction Plate on the Casing Must not be Removed Attachment to support structure Instructions for the installerPositioning of HOB Instructions for the installer Electrical Connection Connection to LPG GAS Connection Discharge of combustion products Ventilation of rooms Removing the hob Adaptation to Different Types of GAS Rated BurnerheatingLPG G30/G31 28/37 mbar capacity Regulation for LPG Regulation of primary air Regulation for natural gas Regulation of minimum for LPG Final OperationsRegulation of minimum for natural gas This must be done by a qualified technician Arrangement of burners on hobLubrication of gas taps Ignition of the burners Using the HOBInstructions for the user Using a griddle plate Practical advice for using the burnersDiameter of containers Electric elements Position Heat Possible Cooking Intensity Using the electric elements Cleaning Cleaning and MaintenanceRegular daily cleaning of the hob Food stains or residues Cover Cleaning of cooking hob componentsIgnition plugs and safety devices