Operation
Power setting | Automatic boost function | |
Time (min:sec) | ||
| ||
|
| |
1 | 0:48 | |
2 | 2:24 | |
3 | 3:50 | |
4 | 5:12 | |
5 | 6:48 | |
6 | 2:00 | |
7 | 2:48 | |
8 | 3:36 | |
9 | - | |
|
|
GB
Automatic boost function 
Parboiling takes place at power level 9 with the automatic boost function. After a certain time the power level will switch down automatically to a lower simmering setting (1 to 8).
When using the automatic boost function only the simmering setting with which the food is to be cooked through needs to be selected since the electronic unit switches down automatically.
The automatic boost function is suitable for dishes which are cold initially and are then heated up at high power. These dishes do not need to be constantly monitored when simmering (e.g. boiling meat for soups).
1.Switch a cooking zone on. The
2.Select power setting 9. Pressing the plus button 
again will activate the automatic boost function.
The power level setting will indicate A and 9 alternately.
In the case of induction, an A and 
will be shown if no pot has been placed on the cooking zone.
3.Then immediately use the minus button 
to select a lower simmering setting from 1 to 8.
A and the selected simmering setting will blink alternately.
4.The automatic boost function will operate as programmed. After a certain time (see chart) the cooking process will be continued with the simmering setting.
Please note
•While the automatic boost function is in operation, the plus button can be used to 
raise the simmering power setting. Pressing the minus button 
will switch the automatic boost function off.
•If, after activating the automatic boost function, the power level is left at level 9 and no lower simmering setting is selected, the automatic boost function will be switched off automatically after 10 seconds and the cooking level will remain at 9.
•If a higher cooking setting or the power boost setting is activated, the automatic boost function may switch off if the maximum power level is exceeded (see power management).
hold
Keeping warm function 
(if available)
With the function for keeping food warm 
you can use one of the cooking zones to keep food warm. The respective cooking zone is operated at a low power level.
1.Cookware is placed on a cooking zone and a power level (e.g. 3) is selected.
2.Keep the minus button 
pressed to switch the power settings down (... 3, 2, 1, 
). The setting will stop at 
and the warming function will have been activated.
3.Press the minus button 
once to
This keeping warm function is available for 120 minutes; the hob will then be switched off.
26
