Smeg SE2642ID2 manual Appliance description, Operating the hob with the touch keys, ON/OFF button

Appliance description

Hob

Cooking zone

The decorative design may deviate from the illustrations.

A.Induction cooking zone back left

B.Induction cooking zone back right

C.Induction cooking zone front left

D.Induction cooking zone front right

E.Touch-Control operating panel

F.Cooking zone back left (radiant heating element)*

G.Cooking zone back right (radiant heating element)*

*For this model the two cooking zones at the back are equipped with radiant heating elements (they are not induction-heated). Pots and pans do not need to have magnetic properties.

1.Power setting display

2.Stand-by dot (cooking zone)

3.Cooking zone selection button

4.Power button Induction: Power boost

Radiant heating elements: Switching on the second element

5.Plus button (raise)

6.Minus button (lower)

7.Timer indicator lamp

8.Switch-off time display

9.Stand-by dot for the automatic switch-off device

10.Timer selection button

11.STOP button

12.ON/OFF button

13.Minute minder lamp

14.Not present for all models

Operating the hob with the touch keys

The ceramic glass hob is operated with touch control sensor buttons. The touch keys are operated as follows: touch a symbol on the surface of the ceramic glass plate. A buzzer will indicate when the controls have been operated correctly. The touch control sensor button will then be indicated as “button”.

ON/OFF button (12)

This button is used to switch the entire hob on and off. It is, as it were, the main switch.

Cooking zone selection button (e.g. for front left) (3)

Pressing one of the cooking zone selection buttons available will select a cooking zone, for which the plus button or the minus button may be used to set the cooking level.

Minus button (6) / Plus button (5)

These buttons are used to set the cooking levels, the automatic switch-off device and the minute minder. The minus button reduces the setting and the plus button raises it. The setting will be shown when both buttons are pressed simultaneously.

Power setting display (1)

The power setting display shows the power setting which has been selected, or:

H	Residual heat
P	Power boost setting
..............	Pan recognition device
A	Automatic parboiling mode
STOP	Stop function
L	Childproof lock
..............	Keeping warm function (if available)

STOP button (11)

The STOP function can be used to briefly stop the cooking process.

Timer selection button (10)

For programming the automatic switch-off device (timer) and the minute minder.

20