Instructions for assembly | GB |
Type |
Bracket 
•Insert the hob and align it.
•From the bottom, insert the brackets with screws in the holes provided for fastening the brackets, align the brackets and screw them tight.
•Tighten the screws with a hand screw driver only; do not use a
•In the case of thin worktops make sure that the brackets are correctly positioned. A metric screw must be used on the bracket to balance it.
Important!
There is a risk of breakage if the hob is canted or subjected to stress during installation!
Minimum distance to adjacent walls
Outer dimensions of the hob
Cable routing in rear wall 
Installation height
32
