Smeg SE2642ID3 Residual heat indicator, Cooking zones, Control panel, Instructions for the User

Instructions for the User

6.9 Residual heat indicator

The hob is equipped with a residual heat indicator in the form of the symbol.

When is displayed after the heat has been switched off, it indicates that the residual heat can be used to keep food hot or melt certain foods.

The cooking zone may still be hot even after the symbol is no longer displayed. Danger of burns! The glass ceramic surface does not heat up directly but is heated only indirectly by the bases of the saucepans.

6.10 Cooking zones

The appliance has 4 cooking zones of various power levels and diameters. Their position is clearly indicated with circles and the heat is limited to within the diameters traced on the glass.

The 4 cooking zones are of the HIGH-LIGHT type; they turn on after a few seconds and their heat level can be adjusted by means of the controls on the front panel from 1 (min.) to 9 (max.).

FRONT LEFT HOTPLATE	REAR RIGHT HOTPLATE
REAR LEFT HOTPLATE	FRONT RIGHT HOTPLATE

6.11 Control panel

All the appliance's control and monitoring devices are located together on the front panel. The symbols used are described in the table below.

REAR LEFT COOKING ZONE	REAR RIGHT COOKING ZONE
FRONT LEFT COOKING ZONE	FRONT RIGHT COOKING ZONE
INCREASE VALUE BUTTON	TIMER BUTTON
DECREASE VALUE BUTTON	HOB ON / OFF BUTTON
STOP BUTTON	POWER FUNCTION BUTTON

39