Instructions for the installer

1 - Operation at 380-415V2N˜:use a H05V2V2-F type four-core cable (4 x 2.5 mm2 cable);

2 - Operation at 220-240V˜:use a H05V2V2-F type three-core cable (3 x 4 mm2 cable);

The end to be connected to the appliance must have an earth wire (yellow-green) at least 20 mm longer than the others.

The manufacturer cannot be held liable for damage to persons or things caused by failure to observe the above instructions or by tampering with any part of the appliance.

Page 26

Image 26

Smeg SE2642ID3 manual Instructions for the installer

Contents

Contents Instructions for USE Plate Must not be Removed Recycling Instructions OUR Environment Policy Information for Users Safety Instructions Authorised Technician or AT AN Authorised Service Centre Please note Safety instructions Before First USE Intended USE of the Appliance Hob Saucepan recognition Protection from overheating induction Limitation on the duration of useOther functions Saucepans suitable for use in induction cooking Advice on energy-saving Power levels Control panel Residual heat indicatorCooking zones Using the Sensors Cooking zone selector button MAX Absorbed Power Using the HOBOperating power settings Absorbed Power Power Function Switching off the hob Switching on the hob and the cooking zoneSwitching off the cooking zone Stop function Automatic switch-off timer Activating the child lock Timer clock Quick start cooking Plate warmer function where applicable Power function cooking zone with P Cooking guidelines Power managementSetting Type of Food Weekly cleaning Cleaning and MaintenanceCleaning the glass ceramic hob Never Steam Clean the Appliance TROUBLE-SHOOTING Problem Possible Causes Solution Instructions for the User Ventilation InstallationSafety instructions for installing kitchen furniture Positioning Hob seal Section cut from the work surface Positioning the fastening clips Inserting the hob into the hole in the work surface Electrical connection Technical informationRating plate HOB Rating Instructions for the installer