Instructions for Use 19
Prepare your machine for washing− Select laundry and load a suitable amount.
− Close the door (push it towards the machine).
− Fill the dispenser (in the correct sections).
− Check water inlet and outlet.
− Choose the right programme.
− If your machine is equipped with switches, use them, as appropriate.
− Select the washing temperature, if your washing machine is equipped
with this option.
− Switch the machine on.
After Washing− Switch off the machine (the control
lamp turns off).
− Check that the washing is finished
and that water is pumped out of the
machine to avoid unnecessary
flooding. If there is still water in the
machine, select one of the
programmes for pumping or
spinning.
− Some two minutes after the washing
is finished you can open the door.
− Take the laundry out of the machine
and turn the drum once or twice with
hand to make sure it is really empty.
− Check the rubber gasket on the door and remove objects that might
have deposited (buttons, pins..) (fig. 14).
− Leave the door open and allow the interior to dry.
− Disengage any pushbuttons you used.
− Close the water tap.
− Check the dispenser and clean it if necessary and dry it well.
− Replace the filter in the reverse order and screw it down firmly.
Check it for sealing prior to washing.
14