Manuals / Smeg / Kitchen Appliance / Dishwasher

Smeg SNZ414IS, SNZ414S Troubleshooting, User instructions, PHASES/PROGRAM lights 8 identify, Code

Models: SNZ414S SNZ414IS

1 32

Download 32 pages 5.08 Kb

Page 30

6. Troubleshooting

User instructions

6. Troubleshooting

In case of a malfunction, the dishwasher will identify the program by switching on a combination of lights.

	When an alrm is	present, all the		Eco	65°C
	PROGRAM lights (4) come on, while the
	PHASES/PROGRAM lights (8) identify
	the error code:	P1	P2	P3	P4	P5
CODE	PHASES LIGHTS	DESCRIPTION
E1		The anti-flooding system	(if	installed)	has	been
E1		tripped.
		tripped.
E2		The system which limits the water level inside the
E2		dishwasher (safety unit) has been tripped.
		dishwasher (safety unit) has been tripped.
E3		The appliance cannot heat the water.
E4		Temperature sensor disconnected.
E5		The appliance is not able to take in water.
E6		The appliance is not able to pump out the water
E6		from the tank.
		from the tank.

The appliance is not able to measure the amount

E7of water loaded accurately (on models with turbine flow-regulator only).

	E8	Anomaly in the system which distributes water to
	E8	the basket (where installed).
		the basket (where installed).

The maximum level of water for loading has been

E9exceeded (on models with turbine flow-regulator only).

31

Image 30

Smeg SNZ414IS Troubleshooting, User instructions, PHASES/PROGRAM lights 8 identify, Code, Phases Lights, Description

Contents

DISHWASHER Contents Safety instructions 1. Safety and operating instructionsSafety instructions Safety instructions Installation instructions 2. Installation and hook-up2.1 Water supply connection Installation instructions CONNECTING TO THE WATER SUPPLYDRAIN CONNECTION 2.2 Electrical connection and precautions Installation instructionsWHEN CLEANING AND MAINTAINING THE APPLIANCE 3.1 Front panel User instructions3. Description of the controls DELAY PROGRAM BUTTONOnly run the soak program with half loads Reference program as AS/NZS 1 Average power consumption with the softener set on levelUser instructions 0,02Reference standard User instructionsTABLE FOR CERTIFICATION BODIES NORMAL ECOBefore starting a washing program make sure that 3.2 Washing programsUser instructions The correct amount of detergent has been added to the dispenserPROGRAMMING PHASES/PROGRAM light 8 will remainUser instructions SELECTION PROGRAMINTERRUPTION OF A PROGRAM User instructionsEND PROGRAM TO CHANGE A PROGRAMDELAY PROGRAM available in all programs except the soak program User instructionsANNULLING A PROGRAM To set the delay once the program has started, proceed as follows User instructionsTO CUT DOWN ON DETERGENT CONSUMPTION! … AND PROTECT THE ENVIRONMENT User instructionsTO SAVE ON ENERGY! … AND PROTECT THE ENVIRONMENT REMOVING THE DISHESUser instructions 4.1 Using the rinse aid and detergent dispensers4. Operating instructions ADDING THE RINSE AIDADJUSTING THE RINSE AID DISPENSER SETTING User instructionsADDING THE DETERGENT User instructions Correct loading of the dishes helps ensure optimal washing results 4.2 General warnings and recommendationsUser instructions MAKE SURE that the items being washed are dishwasher-safeUser instructions Items which are not dishwasher-safeDishes and objects in copper, tin, zinc or brass these tend to stain LOWER BASKET 4.3 Using the basketsUser instructions LOADING THE LOWER BASKETUPPER BASKET User instructionsCUTLERY BASKET Vertical insertsADJUSTING THE UPPER BASKET User instructionsLOADING THE UPPER BASKET CLEANING THE WATER INTAKE FILTER 5. Cleaning and maintenance5.1 General warnings and recommendations CLEANING THE SPRAY ARMSCLEANING THE SPRAY ARM, TRAVELLING VERSION CLEANING THE FILTER UNITUser instructions User instructions GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCETROUBLESHOOTING MINOR PROBLEMS PROLONGED DISUSEIf the dishes fail to dry or remain dull, check that If the dishes are not being cleaned properly, check thatUser instructions If the dishes show signs of streaking, staining, etc., check thatPHASES LIGHTS 6. TroubleshootingPHASES/PROGRAM lights 8 identify User instructionsUser instructions TECHNICAL DATAElectrical characteristics WidthSW32 115 125 135 145115 125 Cuø10