Smeg SNZ4427, SNZ442S User instructions, Cleaning The Filter Unit, Prolonged Disuse

Models: SNZ442S SNZ4427

1 31
Download 31 pages 21.95 Kb
Page 26
Image 26
CLEANING THE FILTER UNIT

User instructions

CLEANING THE FILTER UNIT

The filter H should be periodically removed and inspected, and if necessary, cleaned. To remove the filter, take hold of the handle and turn clockwise, then lift upwards.

Then separate parts L and M, and separate the two parts of the plastic filter by pressing gently in the points shown, lifting it upwards to extract it.

Remove the centre filter by lifting it upwards.

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT MAINTENANCE:

The filters should be cleaned under running water using a stiff brush.

It is essential to thoroughly clean the filters according to the above instructions: the dishwasher cannot function if the filters are clogged.

Carefully replace the filters in their seats, to avoid damaging the wash pump.

PROLONGED DISUSE:

Run the soak program twice in succession.

Unplug the power cord from the socket.

Leave the door slightly open, in order to prevent the formation of unpleasant odours inside the washing tank.

Fill the rinse aid dispenser.

Shut off the water supply tap.

27

Page 26
Image 26
Smeg SNZ4427 User instructions, Cleaning The Filter Unit, General Warnings And Recommendations For Correct Maintenance