Instructions for the installer
7.3 Using the pIzza function (only on some models)
This appliance Is equipped with a function specially developed for cooking pizza. This function is identified by the 
symbol on the oven functions knob.
To cook a pizza, proceed as described below.
With the oven cold, remove the round cover from the bottom of the oven (fig. 1) and fit the pizza plate in its place (Fig. 2).
1) 
2)
Set the oven functions knob on the 
symbol and the thermostat knob on the 
symbol and turn the VARIABLE GRILL KNOB to the desired position.
Preheat the oven with these settings for 15 minutes, then place the pizza on the special plate.
It does not normally take more than
7.3.1 Precautions for using the pizza plate
•Always remove the round cover and fit the pizza plate with the oven off and cold.
•Never use the pizza plate except as described above (for example, never use it on gas or ceramic hobs, or on ovens not designed to take this accessory).
•During use, the appliance becomes very hot; protective gloves should be worn for all operations.
•If you like oil on your pizza, it is best to add it after removal from the oven since oil stains on the pizza plate are unsightly and may reduce its efficiency.
7.4 Storage compartment
A storage compartment, accessible by pulling on the top edge of the door, is located beneath the oven.
Never store inflammable materials such as rags, paper or the like. The compartment is intended only for holding the metal accessories of the range.
The inside of the compartment becomes very hot during operationof the oven: turn off the oven and let it cool down before opening the compartment door.
If your cooker is equipped with knob guard, when cooking using the grill or grill + rotisserie it must be fitted as shown here, fitting the slots "A" onto the pins "B" in the top of the oven.
20
