END of Cycle, Removing the Dishes | Smeg ST1108S instruction

User instructions

END OF CYCLE

At the end of the program the beeper sounds briefly and the lights of programs 4 and 5 flash (the word "end" is displayed on the window).

To switch off the dishwasher, open the door and press the ON/OFF button (1).

REMOVING THE DISHES

At the end of the washing program, wait at least 20 minutes before removing the dishes, to allow them to cool down. To prevent any water droplets on the upper basket from falling on the dishes in the lower basket, it is advisable to unload the lower basket first, and then the upper basket.

Image 11

Smeg ST1108S instruction manual END of Cycle, Removing the Dishes

Contents

Guide for Using the Dishwasher and the Washing Programs Contents User instructions Progress Setting the Washing Program and Switching on 105’ Extra Programs Table for Certification Bodies Changing the Program Delaying the ProgramCancelling the Current Program To Save on ENERGY! … and Protect the Environment Water Hardness Table Adjusting the Water Softening System Switch Setting models without display Removing the Dishes END of Cycle Troubleshooting User instructions For Cleaning Dishwashers Contents Safety instructions Aquastop Models Water supply connection Connecting to the Water Supply Drain Connection Electrical connection User instructions Using the water softening system Adding the Rinse AID Using the rinse aid and detergent dispensersAdjusting the Rinse AID Dispenser Setting Adding the Detergent General warnings and recommendations Loading the Lower Basket Using the basketsEN 50242 Standard Loads for Certification Bodies Lower Basket Upper Basket Cutlery Basket Loading the Upper Basket Adjusting the Upper Basket Cleaning the Spray ARM, Travelling Version Cleaning the Water Intake FilterCleaning the Spray Arms Prolonged Disuse Cleaning the Filter Unit Troubleshooting Minor Problems Technical Data Atención AttenzioneAchtung LET OP