Technical Data | Smeg ST1108S manual

User instructions

TECHNICAL DATA

Width		447 ⎟ 449 mm

Depth measured flush with the outer edge of		Free standing: 600 mm
the control panel		Semi-integrated: 590 mm - Fully integrated: 570 mm

Height		Free standing from 850 mm to 870 mm
		Semi-integrated and fully integrated: from 820 mm to 870 mm

Capacity		10 Standard place settings

Water supply pressure		Min. 50 – max. 900 KPa (min. 0.5 – max. 9 bar)

Electrical characteristics		See rating plate

34

Image 30

Smeg ST1108S instruction manual Technical Data

Contents

Guide for Using the Dishwasher and the Washing Programs Contents User instructions Setting the Washing Program and Switching on Progress 105’ Table for Certification Bodies Extra Programs Delaying the Program Cancelling the Current ProgramChanging the Program To Save on ENERGY! … and Protect the Environment Adjusting the Water Softening System Water Hardness Table Switch Setting models without display END of Cycle Removing the Dishes Troubleshooting User instructions For Cleaning Dishwashers Contents Safety instructions Aquastop Models Connecting to the Water Supply Water supply connection Electrical connection Drain Connection Using the water softening system User instructions Using the rinse aid and detergent dispensers Adjusting the Rinse AID Dispenser SettingAdding the Rinse AID Adding the Detergent General warnings and recommendations Lower Basket Using the basketsEN 50242 Standard Loads for Certification Bodies Loading the Lower Basket Cutlery Basket Upper Basket Adjusting the Upper Basket Loading the Upper Basket Cleaning the Water Intake Filter Cleaning the Spray ArmsCleaning the Spray ARM, Travelling Version Cleaning the Filter Unit Prolonged Disuse Troubleshooting Minor Problems Technical Data LET OP AttenzioneAchtung Atención