Smeg SW Range manual Setting up

GB

Setting up

It is important that the appliance be absolutely level. To level the appliance, remove the kick plate below the door and screw the adjustable feet up or down (figs

8-9). If necessary, it is possible to adjust the back feet before the upright is installed. Use a spirit level to check that the appliance is absolutely level.

If the appliance is to be placed on a soft surface, e.g. floorboards or a carpet, it is best to recheck whether the appliance is still level after a period of time as the underlying surface may give under the weight of the appliance.

fig. 8

Do not tilt the upright more than 7 degrees to avoid damaging the floor.

>7º

fiig. 10

<7º

fiig. 11

fig. 9

6