Before Using
ξ Before connecting the appliance to the mains supply, leave it to rest in its place for about 2 hours. In this way you reduce a possibility of troubles occurring in cooling system due to transport handling.
ξ Remove the two plastic spacers which are situated under the lid and protecting the seal against damages during transport.
ξ Clean the interior of the appliance with lukewarm water into which you have added a few drops of vinegar or baking soda (1 tablespoon per 1 liter of water).
Instructions for Use
These instructions for use are intended for the user of the appliance.They describe the appliance and its correct and safe use. They relate to various types of freezers therefore you will find among them also those functions which do not apply to your appliance.
We Care for the Environment
ξ Our products use environmentally friendly packaging, which can be either recycled or disposed of in an environmentally friendly manner. To this end, individual packaging materials are clearly marked.
ξ These instructions are printed either on recycled paper or chlorine free bleached paper.
ξ When your appliance finally wears out, please try not to burden the environment with it; call your nearest authorised service agent. (See Disposing of the Worn Out Appliance)
Energy Saving
ξ Do not open the lid more frequently than it is necessary as too frequent openings of the lid cause temperature rises in the freezer, excessive formation of frost and consequently higher energy consumption.
ξ Take care not to leave the lid open too long, particularly if the ambient air is hot and humid.
ξ It is recommendet to remove the frost layer when it is 3 to 5 mm thick.
ξ Before loading the appliance with packages of fresh foods, make sure they are cooled to ambient temperature (except for the soup).
ξ If the termostat knob is set towards max (1), do not forget turn it towards min (1) if intensive cooling is no more necessary.
ξ If the gasket is damaged or if it turns out that the sealing is poor, the energy consumption is
substantially higher. To restore efficiency, replace the gasket.
ξ The condenser on the rear wall should be always clean, free of dust or any impurities.
ξ Always consider instructions stated in sections Positioning and Energy Saving Tips, otherwise the energy consumption is substantially higher.
36 | Instructions for Use |
