EN
AOpen door button
B
CDelay timer shown on display LED – (only for models with this option)
DTime remaining shown on display LED
Press the button to open the door. Chapter 5 – Washing instructions – explains how the door works and how to use it.
This knob lets you:
•switch the machine on and off by moving it in either direction from the OFF position (knob indicator vertical)
•select washing temperatures within the various fabric sectors by turning it in both directions
•select the drying programme
The knob does not rotate while the programme is running. The programme is electronically controlled by the machine.
This LED indicates that the display is showing the time selected for the delay timer.
This LED indicates that the display is showing the total duration of the selected programme before the programme starts, and the time remaining while the programme is running.
E | Spin speed shown on | This LED indicates that the display is showing the maximum |
| display LED | spin speed for the selected programme. It stays on while spin |
|
| speed is being selected with the relative button. |
|
|
|
FDrying programme for normal garments shown on display LED
This LED indicates the selection of the normal drying programme (drying temperature 90°C – for resistant items, cottons).
GDrying programme for delicates shown on display
LED
This LED indicates the selection of the delicate drying programme (drying temperature 60°C – for synthetics, delicates).
H | Display | The display shows the following information: | |
|
| 1. | time remaining for the selected programme, given |
|
|
| in hours/minutes. |
|
| 2. | delayed start (for models featuring this option). |
|
|
| Given in hours/minutes. When the time remaining |
|
|
| before the programme starts is less than 60 minutes, |
|
|
| this information is given in minutes/seconds. |
|
| 3. | spin speed |
|
| 4. | drying times given in hours/minutes |
|
| 5. | cycle pause - flashing STOP |
|
| 6. | end of cycle - END |
|
| 7. | error codes |
|
|
|
|
15
