|
|
|
| GB |
|
|
|
| |
|
| Display | The display shows the following information: | |
| G | |||
|
|
| 1. | time remaining for the selected programme, given |
|
|
|
| in hours/minutes. |
|
|
| 2. | delayed start (for models featuring this option). |
|
|
|
| Given in hours/minutes. When the time remaining |
|
|
|
| before the programme starts is less than 60 minutes, |
|
|
|
| this information is given in minutes/seconds. |
|
|
| 3. | spin speed |
|
|
| 4. | drying times given in hours/minutes |
|
|
| 5. | cycle pause - flashing STOP |
|
|
| 6. | end of cycle - END |
|
|
| 7. | error codes |
|
|
| To find | out which of the first 4 pieces of information are |
shown on the display, check which of the LED's, C, D, E, F or
S(the latter for models featuring the delayed start option) is
lit.
HSelect spin speed button or stop with tub full
ISelect programme and dry- ing time button
LSelect programme and dry- ing time button enabled
LED
Press the button repeatedly to select the required spin speed. The following spin speeds are available:
•0000: spin disabled and stop with tub full. The ma- chine does not perform the final spin and ends the washing programme with water in the tub. To drain the water, see the explanations shown in paragraph 5.13
•from 600 rpm to the maximum speed indicated for the model: for cotton and coloured programmes, speed increases by 100 rpm starting from 600 rpm up to the maximum speed indicated for the model
•from 600 to 900 rpm: for synthetics, delicates and woollens programmes, speed increases by 100 rpm starting from 600 rpm up to 900 rpm.
Press the button repeatedly to select drying times up to a maximum of 2 hours (120 minutes), with increments of 10 minutes, starting from 20 minutes. The type of drying cycle can be selected with one of the following LED's:
•Delicate drying programme (letter E in this section): drying temperature 60°C, for synthetic and delicate garments.
•Intensive drying programme (letter F in this section): drying temperature 90°C, for cotton and coloured garments.
This LED lights up when drying times are being selected and during the drying phase.
14
