Failure

Possible cause

Remedy

 

The machine does not

Machine is not powered.

Check if:

 

work (indicator LED’s

 

• power in the socket,

 

are not illuminated).

 

• the fuse is OK,

 

 

 

• plug is in the socket.

 

Washing program

Door is not properly closed.

Push it towards the machine.

 

does not start

 

 

 

(washing stage LED is

 

 

 

flashing).

 

 

 

Water does not enter

Disturbed water inlet.

Check if:

 

the machine (after

 

• the water faucet is open,

 

approx. 8 min the

 

• inlet pipe net filter is clean.

 

machine reports

 

Push the START button.

 

failure -3 flashes).

 

 

 

Water is leaking from

Filter is not tightly screwed in.

Tighten the filter properly.

 

the machine.

Inlet pipe is not tightly screwed

Tighten the inlet pipe.

 

 

to the machine or to the water

Affix the outlet pipe to the drain.

 

 

faucet.

 

 

 

Outlet pipe fell to the floor.

 

 

The machine moves

The machine is not properly

Level the machine with the adjustable

 

during operation.

leveled.

legs.

 

 

Transport brackets are not

Remove transport brackets.

 

 

removed.

 

 

The machine vibrates

Unevenly distributed laundry,

This is normal, the machine will

 

during the spin.

especially with very small

reduce the RPM if vibrations are too

 

 

quantities (for ex. only the

strong.

 

 

bathrobe).

Wash larger quantity of laundry.

 

Excessive foaming

Excessive measure of detergent.

Use washing powder according to

 

during washing.

 

the instructions by the producer and

 

 

 

according to the water hardness and

 

 

 

soiled laundry.

 

 

 

Use only detergents for machine

 

 

 

washing.

 

Water is poorly

Water outlet is clogged.

Check if:

 

pumped out or not at

 

• the filter is clean,

 

all (machine reports

 

• outlet pipe is not jammed,

 

failure - seven flashes

 

• outlet pipe is positioned higher than

 

of LED).

 

1 m.

 

 

 

Push START again.

 

 

 

 

 

Laundry is not

The machine switched on the

The machine operates normally.

 

properly spun.

UKS* function. Because of bad

Wash large and small pieces of

 

No failure is reported.

laundry balance, the machine

laundry together.

 

 

has automatically reduced spin

 

187348

 

RPM.

 

 

 

 

25

Page 25
Image 25
Smeg WM62141, WM62121 manual Failure Possible cause Remedy