SCH5617C

Desktop System

Controller Hub with

Advanced, 8051µC-Based

Auto Fan Control

PRODUCT FEATURES

Data Brief

„ACPI 2.0 Compliant

„High Performance 8051

—2.5X average instruction execution speed improvement over the entire instruction set; i.e., typical 4-clock instruction cycle in high-performance 8051 vs. 12-clock instruction cycle in standard 8051.

—Faster clock speed: 32 MHz vs. 16 MHz in standard 8051.

—Dual Data Pointers

—More Interrupts: Power-Fail, External Interrupt 2, External Interrupt 3, etc.

—A set of External Memory/Mapped Control Registers provides the 80C51 core with the ability to directly control many functional blocks of the SCH5617C.

—384 Bytes of RAM as part of the 8051 core

—4k Bytes Data RAM (869 bytes may be used to patch ROM code)

—Twelve Interrupt Sources

—Watch Dog Timer (WDT)

„PECI Interface

—Supports PECI REQUEST# and PECI AVAILABLE signalling

„Temperature Monitor

—Monitoring of up to Two Remote Thermal Diodes

—Supports temperature readings from -63 degrees to +192 degrees

–Supports monitoring of discrete diodes (3904 type diodes)

–Supports monitoring substrate diodes (45nm & 65nm processor diodes)

—1/8th degree temperature resolution

—Internal Ambient Temperature Measurement

—Limit Comparison of all Monitored Values

„PROCHOT_IN# Pin

—Mapped into Temperature monitoring interrupt generation logic

—May be used to adjust fan control limits

—May be configured to force fans on full

„PROCHOT_OUT Pin

„Auto-Fan Control with ProcHot Features

—PWM (Pulse width Modulation) Outputs (3)

–Legacy PWM control dc fan outputs

—High Frequency PWM Options (15kHz up to 30kHz)

—2 second delayed start-up for PWM outputs

—Fan Tachometer or Lock Rotor Inputs (3)

—Programmable linear automatic fan control based on temperature

—Acoustic enhancement mode

—ProcHot pins modulate Tmin

—Fan PWM duty cycle is a function in linear mode of multiple temperatures and ProcHot signals

—PWM Ramp Rate Closed Loop Control

„Internal Ring Oscillator for VTR Powered Logic

„Low Battery Warning

„LED Control

„SMBus Isolation Logic

„Programmable Wake-up Event Interface

„PC2001 Compliant

„General Purpose Input/Output Pins (30 Host controlled, 16 8051 controlled)

„21 Dedicated Scratchpad registers

„ISA Plug-and-Play Compatible Register Set

„System Management Interrupt

„GLUE Logic

—IDE Reset/Buffered PCI Reset Outputs

—Power OK Signal Generation

—Power Sequencing

—Power Supply Turn On Circuitry

—Resume Reset Signal Generation

—Hard Drive Front Panel LED

„2.88MB Super I/O Floppy Disk Controller

—Licensed CMOS 765B Floppy Disk Controller

—Software and Register Compatible with SMSC's Proprietary 82077AA Compatible Core

—Supports Two Floppy Drives

—Configurable Open Drain/Push-Pull Output Drivers

—Supports Vertical Recording Format

—16-Byte Data FIFO

—100% IBM® Compatibility

—Detects All Overrun and Underrun Conditions

—Sophisticated Power Control Circuitry (PCC) Including Multiple Powerdown Modes for Reduced Power Consumption

—DMA Enable Logic

—Data Rate and Drive Control Registers

—480 Addresses, Up to Eight IRQs, and Four DMA Options

—Enhanced Digital Data Separator

–2 Mbps, 1 Mbps, 500 Kbps, 300 Kbps, 250 Kbps Data Rates

–Programmable Pre compensation Modes

SMSC SCH5617C

PRODUCT PREVIEW

Revision 0.7 (12-09-08)