USB2512Ai

Industrial Temperature Rated

USB 2.0 Hi-Speed 2-Port Hub

Controller

PRODUCT FEATURES

Datasheet

General Description

The SMSC 2-Port Hub is a low power, OEM configurable, STT (single transaction translator) Hub controller IC with 2 downstream ports for embedded USB solutions. The 2-port Hub is fully compliant with the USB 2.0 Specification and will attach to an upstream port as a Full-Speed Hub or as a Full-/Hi-Speed Hub. The 2-Port Hub supports Low-Speed, Full-Speed, and Hi-Speed (if operating as a Hi-Speed Hub) downstream devices on all of the enabled downstream ports.

General Features

„Hub Controller IC with 2 downstream ports

„Enhanced OEM configuration options available through either a single serial I2C EEPROM, or SMBus Slave Port

„36-pin (6x6mm) QFN lead-free RoHS compliant package

„Supports industrial temperature range of -40ºC to 85ºC

Hardware Features

„Low power operation

„Full power management with individual or ganged power control of each downstream port

„On-chip Power-On Reset (POR)

„Internal 1.8V Voltage Regulator

„Fully integrated USB termination and Pull-up/Pull- down resistors

„On Board 24MHz Crystal Driver, Resonator, or External 24MHz clock input

„Enhanced EMI rejection and ESD protection performance

OEM Selectable Features

„Customizable Vendor ID, Product ID, and Device ID

„Select whether the Hub is part of a compound device: When any downstream port is permanently hardwired to a USB peripheral device, the Hub is part of a compound device

„Flexible port mapping and disable sequence: Ports can be disabled or reordered in any order to support multiple product SKUs. The Hub will automatically reorder the remaining ports to match the Host controller's numbering scheme.

„Programmable USB differential-pair pin location: Ease PCB layout by aligning USB signal lines directly to connectors

„Programmable USB signal drive strength: Recover USB signal integrity due to compromised system environment using 2-level driving strength resolution

„Select the presence of a permanently hardwired USB peripheral device on a port-by-port basis

„Configure the delay time for filtering the over-current sense inputs

„Configure the delay time for turning on downstream port power

„Indicate the maximum current that the 2-port Hub consumes from the USB upstream port

„Indicate the maximum current required for the Hub controller

„Pin Selectable Option for Default Configuration: Select Downstream Ports as Non-Removable Ports

Applications

„LCD monitors and TVs

„Multi-function USB peripherals

„PC motherboards

„Set-top boxes, DVD players, DVR/PVR

„Printers and scanners

„PC media drive bay

„Portable Hub boxes

„Mobile PC docking

„Embedded systems

SMSC USB2512Ai

DATASHEET

Revision 1.97 (08-11-08)